Have you ever opened a Shaw-Box 700 Series wire rope hoist to see its inner workings? Do you know what the ideal preventative maintenance schedule should be on a Yale World Series, or how to properly double reeve a Cable King? The Columbus McKinnon training programs answer all these questions and a whole lot more. [...]
{ 0 comments }
Columbus McKinnon has opened its newest state-of-the-art training facility in Tonawanda, NY. Over the past few months, our training team has been renovating Columbus McKinnon’s previous headquarters(most recently the LodeRail production plant) in Tonawanda, NY into a new training center. This facility now holds certification classes and training courses featuring a combination of classroom and [...]
{ 2 comments }
Thanks to everyone who submitted comments! We added them under the original post. If you have any questions about any of the above notations, please send an e-mail to cmcolive@cmworks.com and we will address them for you. We are very sorry that our “comment” field wasn’t functioning this week. We are working to resolve the issue. [...]
{ 0 comments }
Since our comment box isn’t working (thanks for your patience!), please send your ideas to cmcolive@cmworks.com and we will post them below as they come in. Otherwise check in on Friday for the answer! Response #1: The most noticeable defect is that the chain guide is worn considerably on one side which suggests side loading and it [...]
{ 1 comment }
About this time each year, OSHA releases a list of those facilities subject to an OSHA “head to toe” inspection because of their rate for severe injuries. This year’s list of 15,000 facilities looking forward to an OSHA inspection is out with a new concern: the costs of violations could skyrocket with some of the [...]
{ 4 comments }
The opening session for the Industrial Crane & Hoist Conference, to be held May 26-27, 2010, in Houston, Texas is sure to set the tone for the rest of event. Peter Cooke, Corporate Trainer for Columbus McKinnon, will start off the education sessions by sharing insight on OSHA and ANSI safety topics as they pertain to [...]
{ 2 comments }
Two prime causes of accidents are overloading and poor rigging. To prevent accidents, we suggest these guidelines: Know the hoist lifting capacity Always know the weight of the object you are lifting Never exceed the working load limit Train operators on proper rigging techniques as well as hoist operation Have rigging handbooks and proper equipment [...]
{ 0 comments }
Most hoist-related accidents that occurred in North America could have easily been prevented by simply ensuring that users were properly trained on the operation, safe rigging, inspection and maintenance procedures of the hoist. Training of operators isn’t just the smart thing to do, it’s also necessary. OSHA requires that only qualified persons operate hoist systems [...]
{ 0 comments }
CMCOLive